Metal material testing machine series

Product technical parameters：

The machine specification：

QT-60200WS 200T electro-hydraulic servo horizontal tensile testing machine adopts full digital high response measurement system based on DSP. The whole process of load and strain measurement is not divided, and the test resolution is up to 1 / 200000. Meet the requirements of relevant GB standards and automatically obtain the result parameters specified in relevant standards (corresponding fixtures or deformation measuring devices shall be configured if necessary).

Main functions:

It is used for tensile and tear tests of various metal materials, woven belts, packaging belts, ropes and other materials, as well as special tests of products.

Main features:

1. The mechanical performance indexes of the tested materials are analyzed and calculated by human-computer interaction. At the end of the test, the elastic modulus, yield strength and non proportional elongation stress are calculated automatically. On the basis of automatic analysis, the analysis results can also be modified manually to improve the accuracy of the analysis.

2. It can make many kinds of curves, such as force deformation, force displacement, force time, stress-strain, deformation time, displacement time, etc;

3. Local amplification of test curve and superposition comparison of multiple curves;

4. There are two control modes: automatic control and manual control. Manual control is separated from the computer control program to complete the test independently; The automatic control is a full digital operation servo mode, with two modes of full-automatic control and man-machine dialogue self programming control to set the test conditions.

5. Various uses: it can carry out tensile, compression, bending, shear, peeling, tearing, low cycle and other tests on metal, non-metal and components. It can meet various test method standards such as ISO, JIS, STM, DIN, GB, etc.

6. The oil source adopts silent design, environmental protection, humanization and unique differential pressure servo system to reduce energy consumption, reduce heating and protect the oil circuit;

7. The high-speed DSP platform has high integration, powerful control, data processing ability and high reliability, which can not be compared with the test machine with other processors.

Meet the following standards:

GB / T 2611-92 general technical requirements for testing machines

JB / T 8612 electro hydraulic servo universal material testing machine

JJG 475-2008 tension, pressure and universal testing machine

The standard accessories：

1. Main machine of testing machine (hydraulic horizontal 10m metal safety cover): 1 set

2. Oil cylinder (stroke: 1.5m, output: 200T): 1 set

3. Electrical control box (control box, oil tank, pipeline): 1set

4. Electro hydraulic servo full digital PC controller: 1 set

5. All digital servo control software: 1 set

6. Lenovo computer + HP printer: 1 set

7. Electro hydraulic servo valve: 1 set

8. Oil pump and motor: 1 set

9. Hydraulic control valve (solenoid valve, overflow valve, pressure maintaining valve, etc.): 1 set

10. Load sensor 200T: 1 set

11. Cylinder piston displacement sensor and connector 1m: 1set

12. Accessories (customized tensile fixture according to customer sample): 1 set

13. Operating instructions: 1 pcs

14. Delivery inspection report: 1 pcs

15. Quality guarantee: 1 pcs

16. Factory equipment list: 1 pcs

• Maximum test force：2000KN
• Accuracy grade of testing machine：Grade 1
• Relative error of test force indication：±1%
• Measuring range of test force：1% - 100% FS (no grading in the whole process)
• Piston moving speed range：0.1-200 mm / min
• Loading rate range of test force：0.02% - 2% FS / S
• Effective distance between guide rails (width)：550 mm
• Maximum stretching space：10000mm
• Effective stretching stroke：1500 mm
• Safety protection device：metal safety cover
• Overall dimension of host：about 14500 × 750 × 680mm
• Overall dimension of oil source：1100 × 1000 × 1200mm
• Total power：5kW (three-phase five wire AC 380V 50Hz)
• Weight：about 8000 kg